Carbon Steel Nipples

Ganpat Metals Pvt Ltd is a known supplier and distributor of CS Nipple, which has shown good formability in a variety of fabrications. It is conceivable that material thicknesses for a project may be reduced if this Carbon Steel Hexagon Reducing Nipple is used, thus reducing cost without compromising quality. We recommend a maximum hot forming temperature for our Carbon Steel Hexagon Nipple in between 2010 Degree F and 2100 Degree F (1100 Degree C to 1150 Degree C). If the shape of the work piece is not compact, the edges of this Carbon Steel One End Threaded Nipple may be significantly cooler than the bulk, and there is risk of cracking in the cooler regions. These precautions are necessary to avoid cross contamination of our CS Both End Threaded Nipple by easily corroded metals that may discolour the surface of the fabricated product. Even when the equipment has sufficient power, allowance must be made for higher spring – back caused by the high strength of this Carbon Steel Concentric Swaged Nipple. Ganpat Metals Pvt Ltd is one of the pioneer dealer and exporter of our Carbon Steel Eccentric Swaged Nipple, where tooling and work surfaces must be thoroughly cleaned before use. In the solution annealed condition from about 1925 Degree F, this CS Hex Nipple has a microstructure with about 40 % ferrite – 50% ferrite. Meanwhile, the high strength of our CS Hex Reducing Nipple can pose problems.