SS 317L Tube To Male Fittings

Ganpat Metals Pvt Ltd is one of the well-known exporting houses of SS 317L Tube to Male Fittings, which can be successfully welded using most standard arc welding processes. In general, preparation for welding should be similar to Stainless Steel 317L Tube Fittings and should include proper cleaning and handling. Joint designs should allow easy access to the weld Stainless Steel 317L Compression Fittings because of poor weld pool fluidity, where designs should also limit total weld volume to reduce shrinkage problems. Pre – heating and post – heating are not required and should be avoided in Stainless Steel 317L Male Connector Fittings, where a low inter – pass temperature should be maintained. Welding is most commonly performed in Stainless Steel 317L Ferrule Tube Fittings using the gas tungsten arc or gas metal arc process, where welding is best performed with a freshly ground throated tungsten electrode. Gas metal arc welding can be successfully performed in all metal transfer modes of Stainless Steel 317L Double Ferrule Tube Fittings depending primarily on base metal thickness. Other non – arc welding processes (example resistance) may also be used in Stainless Steel 317L Compression Tube Fittings. When a filler metal is needed for 317L Stainless Steel Male Connector Fittings, a matching composition rod will provide the best match in thermal expansion properties. If a matching composition is not available, a high nickel filler metal of 317L Stainless Steel Ferrule Tube Fittings can be used.