Stainless Steel 410 Buttweld Fittings

Ganpat Metals Pvt Ltd is one of the well-known suppliers house and stockiest of SS 410 Butt Weld Pipe Fittings, where a hardening heat treatment is necessary to bring out the maximum hardness and wear resistance. Since these materials absorb heat very slowly, Stainless Steel 410 Elbow Butt Weld Pipe Fittings should be heated gradually and allowed to remain at temperature long enough for to ensure uniform temperature in thick sections. For maximum strength, hardness, and corrosion resistance, slowly heat Stainless Steel 410 Tee Butt Weld Pipe Fittings to 1800 Degree F (982 Degree C) and quench to room temperature in oil. If retained austenite is known to be present after the austenitizing and quench to room temperature, additional hardening response in Stainless Steel 410 Reducer Butt Weld Pipe Fittings may be achieved by sub – zero cooling to about –100 Degree F (-73 Degree C). The as – quenched structure of Stainless Steel 410 Cross is quite brittle and should be stress – relieved or tempered at approximately 400 Degree F to 500 Degree F (204 Degree C to 260 Degree C) to restore some ductility. During tempering between approximately 300 Degree F (149 Degree C) and 600 Degree F (316 Degree C), a relaxation of the martensitic structure of Stainless Steel 410 Bends occurs whereby the volumetric stresses associated with the formation of martensitic upon quenching are relieved.