Alloy 20 Tube To Female Pipes

Ganpat Metals Pvt Ltd is one of the prominent distributor & exporter in Incoloy Alloy 20 Tube to Female Fittings, which is commercially pure (99.6 %) wrought nickel. Alloy 20 Tube Fittings is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Alloy 20 Compression Fittings can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Alloy 20 Female Connector Fittings. Hot working temperatures for Alloy 20 Ferrule Fittings should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F. Annealing of Alloy 20 Double Ferrule Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature for Carpenter 20 Compression Tube Fittings can greatly influence the mechanical properties and structure of the material. When operating temperatures are expected to exceed 600 Degree F, carbon content in Carpenter 20 Female Connector Fittings becomes critical. The lower carbon content of Carpenter 20 Tube Fittings makes the material resistant to graphitization and therefore less subject to embrittlement. Carpenter 20 Compression Fittings is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Carpenter 20 Ferrule Fittings has good mechanical properties and excellent resistance to many corrosive environments.

Alloy 20 Tube to Female Pipes Specifications
Specifications	:	ASTM B366 ASME SB 366
Size	:	OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread	:	NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating	:	3000 – 4000 PSI
Applicable Temperature	:	150-400 C
Type	:	Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.