SMO 254 Tube To Female Pipes

Ganesh Industrial Corporation is pioneer supplier and trader of quality 254 SMO Tube to Female Fittings, which is commercially pure (99.6 %) wrought nickel. SMO 254 Tube Fittings is normally limited to service at temperatures below 600 Degree F. At higher temperatures, SMO 254 Compression Fittings can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices for SMO 254 Female Connector Fittings can be utilized when shaping this alloy. Hot working temperatures should be between 1200 Degree F and 2250 Degree F in SMO 254 Ferrule Fittings, with heavy forming to be performed at temperatures above 1600 Degree F. Annealing of SMO 254 Double Ferrule Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature for this can greatly influence the mechanical properties and structure of Alloy 254 Female Connector Fittings. When operating temperatures in Alloy 254 Compression Tube Fittings are expected to exceed 600 Degree F, carbon content becomes critical. The lower carbon content of Alloy 254 Tube Fittings makes the material resistant to graphitization and therefore less subject to embrittlement. Alloy 254 Compression Fittings is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Alloy 254 Ferrule Fittings has good mechanical properties and excellent resistance to many corrosive environments.

SMO 254 Tube to Female Pipes Specifications
Specifications	:	ASTM A403 ASME SB 366
Size	:	OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread	:	NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating	:	3000 – 4000 PSI
Applicable Temperature	:	150-400 C
Type	:	Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.