SS 317L Angle, Channel, Beam, Chain

Ganpat Metals Pvt Ltd is one of the well-established manufacturing house and trader of SS  317L, which can be eliminated by thermal stabilization. Though the heating rate of Stainless Steel 317L Angle to reach the aging temperature (900 degrees Fahrenheit to 1000 degrees Fahrenheit or 482 degrees Celsius to 537 degrees Celsius) does not affect the properties, the cooling rate does. A post – aging quenching (rapid cooling) treatment can increase the toughness of Stainless Steel 317L C-Channel without a significant loss in strength. One such process involves water quenching Stainless Steel 317L H-Beam in a 35 degree Fahrenheit (1.6 degree Celsius) ice – water bath for a minimum of two hours. In this method, Stainless Steel 317L I-Beam is held for several hours at 1500 degrees Fahrenheit to 1600 degrees Fahrenheit (815 degrees Fahrenheit to 871 degrees Celsius). Cleaning part surfaces of contaminants before heat treatment in Stainless Steel 317L T-Beam are sometimes also necessary to achieve proper heat treatment. Stainless Steel 317L Chain can also be cut using flame cutting, which involves a flame – fired torch using oxygen and propane in conjunction with iron powder. Another cutting method for 317L Stainless Steel Angle is known as plasma jet cutting, in which an ionized gas column in conjunction with an electric arc through a small orifice makes the cut. There are a variety of methods for joining 317L Stainless Steel Chain, with welding being the most common, where this method is clean and fast.